PCMag editors select and review products independently. If you buy through affiliate links, we may earn commissions, which help support our testing.

Seagate FireCuda Beskar Ingot External Hard Drive

 & Tony Hoffman Senior Writer, Hardware

Our team tests, rates, and reviews more than 1,500 products each year to help you make better buying decisions and get more from technology.

Our Expert
LOOK INSIDE PC LABS HOW WE TEST
65 EXPERTS
43 YEARS
41,500+ REVIEWS
Seagate FireCuda Beskar Ingot External Hard Drive - Seagate FireCuda Beskar Ingot External Hard Drive
4.0 Excellent

The Bottom Line

Seagate's latest USB external hard drive is decorated with motifs from "The Mandalorian" and offers capable performance at a not-too-elevated price. We only wish it were available in a capacity higher than 2TB.

Buy It Now

Pros & Cons

    • Mandalorian design motif
    • Customizable RGB lighting
    • Status light
    • You can show it off, unlike Seagate's Beskar internal SSD
    • *Includes three-year data recovery service subscription*
    • Limited to 2TB capacity
    • No USB-C connectivity on either end
    • Price premium for the Star Wars trappings
    • *Warrantied for a mere one year*

Seagate FireCuda Beskar Ingot External Hard Drive Specs

Cables Included USB Micro-B-to-A
Capacity 2
Drive Type External Portable
Spin Rate 5400
System-Side Interface USB 3.2
USB Powered?
Warranty (Parts/Labor) 5

Think you're skilled in the ways of the Force? Versed in the Mandalorian Way? (Okay, maybe you just pretend in the mirror.) Either way, you'll want to check out Seagate's $129.99 FireCuda Beskar Ingot External Hard Drive. This 2TB desktop drive is crafted to resemble an ingot of the virtually indestructible metal prized by the Mandalorians and decorated with important elements from the clan's symbology. The Beskar Ingot is a solid performer among external hard drives, though, as you'd expect, its connection to the Disney+ Star Wars spinoff carries a price premium. (And we're a bit puzzled by the lack of USB-C connectivity of any kind.)


A Prime Slice of Mandalorian Bling

While the Seagate FireCuda Beskar Ingot PCIe 4 SSD has a similar Mandalorian-themed design, the Beskar Ingot External Hard Drive takes the concept further. For one thing, it's larger, with more room for decoration; at 0.4 by 2.1 by 4.1 inches (HWD), it's closer to the dimensions of the Beskar ingots depicted in the show, though neither the internal nor external drive attempts to imitate the ingots' metallic sheen.

While the hard drive's top bears the Imperial stamp seen in the show (plus another symbol unidentifiable to me), on the bottom are Mandalorian symbols. The first is the insignia of Clan Mudhorn, the two-person clan comprising the title character plus Grogu (a.k.a. the Child, a.k.a. Baby Yoda), who combine to defeat a mudhorn, an ornery denizen of the planet Arvala-7, in an early episode. Second, as you'd expect if you're even a casual fan of show, is "This Is the Way" in Mandalorian runes, the oft-recited phrase related to the culture's unity and code of honor.

The drive uses a USB 3.2 Gen 1 interface. In the middle of one end is a USB Type Micro-B port, which connects using a provided cable to a computer's USB Type-A port. At the same end is a status light. We're surprised that this drive from the far future doesn't employ USB-C on either end. There's no bundled second cable or USB Type-A-to-C converter.

Seagate FireCuda Beskar Ingot External Hard Drive Imperial stamp

At the drive's other end is an RGB lighting strip that glows when the device is plugged in. I've seen the strip pulse blue and orange, and you can customize the lighting using the free Seagate Toolkit software.

Seagate FireCuda Beskar Ingot External Hard Drive clan insignia

Available in a single (2TB) capacity, the Beskar Ingot External Hard Drive lists for $129.99 but is sold by numerous retailers for $99.99, which comes out to 5 cents per gigabyte. This is at the high end of consumer external drives of this capacity, and other vendors offer higher-capacity hard drives for considerably less per gigabyte. For instance, you can find the 5TB WD My Passport at this writing for as low as 2.4 cents per gig. So you're definitely paying some Mandalorian tax here.

The Beskar Ingot lacks the ruggedization features found on some external hard drives such as the SanDisk Professional G-Drive ArmorATD and the Silicon Power Armor A66. You'll presumably be using the drive at your or a friend's home rather than traversing the mud flats of Arvala-7 or braving a sandstorm on Tatooine. This shouldn't be an impediment, but you'll want to treat it with care and not drop it, like any platter-based drive.

Seagate FireCuda Beskar Ingot External Hard Drive USB cable

Seagate backs the Beskar Ingot with a mere one-year warranty, but includes three years of access to Rescue Data Recovery Services. According to Seagate, the lab claims a 95% success rate for solid-state and hard drive data recovery.


Testing the Beskar Ingot Hard Drive: Speedy Enough, for Spinning Metal

We ran our usual Crystal DiskMark and PCMark 10 Overall storage tests on our Intel X299-based testbed with the Beskar Ingot drive in its default NTFS format, and it did well overall. The drive's sequential read and write speeds, as measured by Crystal DiskMark 6.0, proved typical of a 5,400rpm platter-based drive and fell within the narrow range of values shown by our comparison group. Its read and write speeds were actually a statistically insignificant smidge faster than its peers'. (The one drive in our chart with higher scores, the Seagate FireCuda Gaming Hub, is a 7,200rpm device.)

Its PCMark 10 Overall Score was a little low, but within the normal range of the rather small selection of hard drives on which we've run the current version of that test.

We also reformatted the Beskar Ingot in exFAT and ran two tests from a 2016 MacBook Pro using the laptop's USB-C/Thunderbolt 3 ports. The Mac-only BlackMagic Disk Speed benchmark measures a drive's throughput for reading and writing various video formats. The Mandalorian drive's scores were at the top of a very narrow range among its 5,400rpm competitors.

Finally, in our stopwatch file-transfer test, the drive took 6 seconds to move a 1.2GB folder full of various file types, easily the best among the 5,400rpm drives in our group. (See how we test hard drives.)

Seagate FireCuda Beskar Ingot External Hard Drive packaging

Verdict: A Capable Collectible

Fans of the extended Star Wars universe who are also short on bytes will be satisfied with the Seagate FireCuda Beskar Ingot External Hard Drive. This 2TB slab combines Mandalorian symbols with customizable RGB lighting, and as an external drive is far more attractive as a practical collectible than Seagate's matching internal M.2 solid-state drive. Although reasonably speedy for its category, it's still limited to the relatively plodding speeds of a platter-based drive, making it primarily useful for holding a game or multimedia library for occasional access, not for running programs from.

As a specialty collectible, the Beskar Ingot costs more than most 2TB consumer hard drives, but for fans of The Mandalorian, it should be money well spent. It is only warrantied for a year, although it does come with a three-year subscription to Rescue Data Recovery Services. Our one other quibble is that it's not available in larger capacities, both because higher capacities generally offer lower costs per gigabyte, and because you'd be able to fit a more bountiful gaming library onto it, a big consideration with today's AAA games consuming an ever-increasing amount of drive space.

[Editor's Note: This review was revised on Nov. 15, 2022, with updated information around the warranty length and data recovery service subscription.]

Final Thoughts

Seagate FireCuda Beskar Ingot External Hard Drive - Seagate FireCuda Beskar Ingot External Hard Drive

Seagate FireCuda Beskar Ingot External Hard Drive

4.0 Excellent

Seagate's latest USB external hard drive is decorated with motifs from "The Mandalorian" and offers capable performance at a not-too-elevated price. We only wish it were available in a capacity higher than 2TB.

Get It Now

Buy It Now

About Our Expert

Tony Hoffman

Tony Hoffman

Senior Writer, Hardware

Since 2004, I have worked on PCMag’s hardware team, covering at various times printers, scanners, projectors, storage, and monitors. I currently focus my efforts on 3D printers, pro and productivity displays, and drives and SSDs of all sorts.

Over the years, I have reviewed smart telescopes, iPad and iPhone science apps, plus the occasional camera, laptop, keyboard, and mouse. I've also written a host of articles about astronomy, space science, travel photography, and astrophotography for PCMag and its past and present sibling publications (among them, Mashable and ExtremeTech), as well as for the former PCMag Digital Edition.

The Technology I Use

I have a Lenovo ThinkPad T14 laptop that's my work daily driver, an HP Pavilion Aero 13 as my primary personal laptop, and an Asus ProArt P16 for detailed photo work. (I also have an older Dell XPS 13, which now stays at home full-time.) For storage testing, I rely on our three custom-built Windows testbeds in PC Labs, as well as a 2024 MacBook Pro.

My primary home monitor is a BenQ EX2780Q, a gaming monitor with a great sound system and excellent image quality. I use that panel for writing, watching videos, and working with photos. I also have an HP 27 Curved Display—one of the first general-purpose curved monitors—which I have paired with an Acer Aspire desktop computer. My multifunction printer is an Epson Expression Premium XP-7100 Small-in-One. I also own an Epson Perfection V39 flatbed scanner, which I use for photos and short documents, and a Canon Selphy CP1300 small-format photo printer for turning out snapshots.

My first cell phone, in 2006, was a Motorola Razr; since then, it’s been all iPhones—I currently have an iPhone 15 Pro. I use my iPhone a lot for casual photography, though I also use a Sony DSC-RX100 VII and a Canon G5 X Mark II for everyday shooting. For much of my travel photography and astrophotography, I use either a Sony A7r II or A7 III, paired with a variety of lenses ranging from a Sony 14mm f/1.8 prime to a Sony FE 70-300mm f/4.5-5.6 G OSS zoom lens. I also pair the A7r with a RedCat 51 for deep-sky star shooting. For astrophotography, I also use the Seestar S30 and S50 and the Unistellar Odyssey smart telescopes, which are essentially astronomical cameras controlled through one’s mobile device.

Read full bio